Inquiry
Whatsapp
Email
01020304
Hard Floor Surface Protection Film
Benefits
• Easy roll out with no specialist applicator equipment required.
• Will not creep and wrinkle after application. Stays where it is put!
• Totally waterproof.
• Protects against expensive to clean spillages from paints, varnishes etc.
• Easily removed, will not leave a sticky residue.
• Can be left for up to 3month.
• Adheres to most Hard surfaces types
Product Specification
| Raw material | polyethylene |
| Glue type | water-based acrylic |
| Film blowing process | 3 layer co-extrusion |
| Recommended thickness | 60 microns（2.5mil）,76micron(3mil) |
| Recommended length | 15m(50feet), 25m(80feet),61m(200feet),100m(300feet),150m(500feet),183m(600feet) |
| Recommended width | 610mm(24 inches) ,910mm(36 inches) , 1220mm(48 inches) |
| Colour | Transparent, white, blue、red,or customized |
| Printing | Can customized max.3 colour Printing |
| Core diameter | 76.2mm(3inch),50.8mm(2inch),38.1mm(1.5inch) |
| Product performance | Scratch proof, puncture resistant, rust proof, moisture-proof and antifouling |
| Recommended Peel Strength | 220g/25mm |
| Recommended glue amount | 12g/㎡ |
| Tensile strength transverse | >20N |
| Tensile strength longitudinal | >20N |
| Elongation transverse | 300%-400% |
| Elongation longitudinal | 300%-400% |
| Storage conditions | Cool and dry place for 3 years |
| Service conditions | Use below 70 ℃,Tear off the protective film within 60 days (except for special properties) |
| Unwind method | Normal wound （glue inside） |
| Reverse wound （glue inside） | |
| Advantages | Easy to tear, easy to stick, no residual glue, firm printing |
| Certification | ISO、SGS、ROHS、CNAS |
| Shelf life | 36month from date of manufacture |
Product Pictures and Individual Package
We offer a variety of packaging modes: roll packaging, pallet packaging, carton packaging, and support packaging customization, printed logos,Carton customization, paper tube printing, custom labels, and more.
Core Specification
| Core ID | Core thickness |
| 2inches | 3mm |
| 3inches | 4mm |
| 1.5 inches | 3mm |
Application Scenarios
Hard surface floor PE (Polyethylene) protection film is used in a variety of settings to protect floor surfaces and extend their lifespan, preventing scratches, wear, and dirt. Here are the main application scenarios for floor surface pe protection film:
1.Home: PE floor protection film can be used on various home flooring types, such as hardwood, tiles, marble, and carpets, to prevent scratches caused by furniture movement and during renovations or cleaning. Recommended Size:Hardwood floors: PE floor protectors with a width of 24 inches (60 cm) to 30 inches (75 cm) are usually recommended. Tile or marble floors: wider sizes such as 30 inches (75 cm) to 36 inches (90 cm) can be selected to cover a larger area.
2. Interior Renovations: During interior renovation projects, PE floor protection film can be applied to cover floors, protecting them from construction materials and workers' footwear. Recommended Size:Dimensions are dependent on the area of flooring to be covered, usually between 24 inches (60 cm) and 36 inches (90 cm).
3. Commercial Spaces: Commercial spaces such as restaurants, offices, hotels, and stores can use PE floor protection film to safeguard floors from high foot traffic and furniture wear.
4. Exhibitions and Event Venues: In exhibition halls, conference centers, and event venues, PE floor protection film can be used to shield floors from the impact of booth setups and high foot traffic. Recommended Size:Offices and stores: widths typically range from 36 inches (90 cm) to 48 inches (120 cm) to accommodate common needs in commercial locations.Restaurants and hotels: wider sizes such as 48 inches (120 cm) or wider may be selected to accommodate high traffic areas.Other commercial establishments: sizes will vary depending on specific needs, usually between 30 inches (75 cm) and 48 inches (120 cm).
5. Healthcare Facilities: Hospitals and clinics can use PE floor protection film to protect floor surfaces, maintaining hygiene and sanitation standards. Recommended Size:PE floor protectors in widths of 24 inches (60 cm) to 36 inches (90 cm) are recommended to maintain sanitary standards.
6. Schools and Kindergartens: In schools and kindergartens, PE floor protection film can safeguard floors from the playtime and chair movements of children.
Recommended Size:Sizes typically range from 36 inches (90 cm) to 48 inches (120 cm) to accommodate children's activities and furniture needs.
7.Construction Sites: On construction sites, PE floor protection film can protect newly installed floors from dust, mud, and construction materials.
Recommended Size:Sizes are available in widths between 36 inches (90 cm) and 48 inches (120 cm), depending on the needs of the specific industrial site.
8 Transportation: During transportation, PE floor protection film can be used to package and protect flooring materials, preventing damage during transit.
Recommended Size:Sizes are subject to the size of the flooring material being transported, typically between 36 inches (90 cm) and 48 inches (120 cm).
The sandblasting process is the process of cleaning and roughening the surface of the substrate using the impact of high-speed flowing sand. It uses compressed air as the power to form a high-speed jet beam to spray the spray material (such as copper ore sand, quartz sand, emery sand, iron sand, Hainan sand, glass sand, etc.) to the surface of the workpiece to be treated at high speed so that the outer surface of the workpiece surface changes in appearance or shape. Due to the impact and cutting action of the abrasive on the surface of the workpiece, it gives the surface of the workpiece a certain degree of cleanliness and different roughness.
Instructions For Use
1.Remove the plastic cover surrounding the roll.
2.Find the beginning of the roll. Place the film at the beginning of your surface and firmly press down against the carpet to ensure it adheres.
3.Continue unwinding the roll. Apply consistent pressure and smooth down the film as you go.
4.When you have fully covered your desired area, carefully cut the film with a razor blade.
5.Use a permanent marker to write the date somewhere on the film. Remove the carpet film within 45 days of application.
6. If you are covering a large surface area, Tianrun recommends using a carpet film applicator.
Product Advantages
1.We have many years of production experience and offer you 100% quality assurance!
2.We have a full range of products, providing you with different sizes of carpet protection film, which can meet your needs for carpet film in different scenarios.
3.Support OEM and ODM, provide a variety of customized services.
4.Reverse wrap for easy installation. Simple to operate and easy to use, the peeling process of PE protective film is very simple and will not damage the surface.
5.Can be left in place for up to 45 days.
6.Offering carpet dispensers for purchase, Pro Tect for Carpets is known for saving money by protecting carpets on a variety of construction sites.
What Makes Us Different
What you care about:
1. A floor protection film that is easy to apply but still strong and sticky enough to protect the floor from harsh environments such as construction or renovation areas.
2. Want a product that is strong and tacky, but they also need a film that can be easily and cleanly removed without leaving any residue. Even if a wooden floor or tile is protected from harsh environments, what good is a protective film if the film itself damages the floor underneath?
What we can do for you: Say goodbye to damaged floors!
Once you add our high-quality plastic floor covering to your supplies, you'll never have to worry about floor damage again. Simply take a few minutes to apply this durable protective film to the floor you want to protect, and you'll be ready to go for the duration of your project! Construction debris, dirt, and paint won't damage the hardwood floors underneath, which means you have one less thing to worry about. When the job is done, simply pull up on one corner and the film removes quickly and easily!